Go Back   Codemasters Forum > MMO Games > The Lord of The Rings Online / Der Herr der Ringe / Le Seigneur des Anneaux > Game Service Forums > Technical Assistance forum
Sign In
Register on CodeM

Notices

Technical Assistance forum Use this forum to talk about technical aspects of the game with your fellow LOTRO players.

Reply
 
Thread Tools Display Modes
Old 20-04-2007, 07:24 PM   #1
Daveydje
Junior Member
 
Join Date: Mar 2007
Location: United Kingdom
Posts: 11
Unhappy Radeon X800 GTO VPU Recover Issue

Is anyone else out there running a Radeon X800 GTO card, and having problems?

Game seems to play find, then i turn a corner/open a door/open a quest window, and then:

1. Game freezes.
2. Screen flickers, and comes back to the game.
3. Little message box pops up saying "VPU Recover has reset your graphics accelerator as it was no longer responding to graphics driver commands".

It'll stand to do this 3 times, on the 3rd time, the screen stays black, and you get a system error box saying Directx9c is no longer responding, which results in me having to reboot.

I've got the latest directx (9c). Tried a clean uninstall using drivercleaner.net and the latest radeon drivers (7.4), even done tried older version of the drivers (someone suggested 6.12 were more stable).

There are some suggestions on the US forums that the card could be over-heating but it doesn't seem to be, and this is the only game i've had issues with.

I know this is more likely a card/driver problem than an issue with the game as such, but it's driving me nuts, so i wondered if anyone else had encountered it?
Daveydje is offline   Reply With Quote
Old 21-04-2007, 01:34 PM   #2
Daveydje
Junior Member
 
Join Date: Mar 2007
Location: United Kingdom
Posts: 11
Default

just me then... nuts...
Daveydje is offline   Reply With Quote
Old 21-04-2007, 01:54 PM   #3
khazneh
Stormreach Mentor
 
khazneh's Avatar
 
Join Date: Dec 2005
Location: Buckinghamshire, UK
Posts: 7,625
Default

To be honest the reason for this (apart from drivers) is most commonly the temperature the card gets up to (specifically the GPU).

Catalyst Control Panel has a temperature indicator in the Overclocking section - keep an eye on this. I had an X800 Pro and it would crash if the temperature rose above about 75 degrees. Alhough less than 65 is healthy.

You might like to try cleaning the fan and make sure it is rotating ok, also check that your case fans are workin fine. Reseating the card may help too, in case its a power issue. Always use anti-static protection when handling components in the PC.
__________________
"If anyone was to ask for my opinion, which I note they're not, I'd say we were taking the long way around." (Gimli)
khazneh is offline   Reply With Quote
Old 21-04-2007, 05:17 PM   #4
ijeffers
Member
 
ijeffers's Avatar
 
Join Date: Dec 2006
Location: 1 Twinfall Path, Ladenael, Falathforn, Evernight
Posts: 45
Default

I'm getting this same issue with an X700 card.

Initially I thought it might have been something to do with the game resolution being different from the desktop for whatever reason, but then again after the GPU recover has reset the desktop resolution I've still gone on to experience 2 consecutive GPU recoveries.
ijeffers is offline   Reply With Quote
Old 21-04-2007, 09:07 PM   #5
khazneh
Stormreach Mentor
 
khazneh's Avatar
 
Join Date: Dec 2005
Location: Buckinghamshire, UK
Posts: 7,625
Default

Quote:
Originally Posted by ijeffers
I'm getting this same issue with an X700 card.

Initially I thought it might have been something to do with the game resolution being different from the desktop for whatever reason, but then again after the GPU recover has reset the desktop resolution I've still gone on to experience 2 consecutive GPU recoveries.
Which version of Catalyst drivers are you running? It might be as well to move to Catalyst 7.4 if you can.

You can try going into the lotro folder in My Documents and editing UserPreferences.ini and setting AllowFakeFullScreen=False, the set SyncToRefresh=True
__________________
"If anyone was to ask for my opinion, which I note they're not, I'd say we were taking the long way around." (Gimli)
khazneh is offline   Reply With Quote
Old 21-04-2007, 11:24 PM   #6
ijeffers
Member
 
ijeffers's Avatar
 
Join Date: Dec 2006
Location: 1 Twinfall Path, Ladenael, Falathforn, Evernight
Posts: 45
Default

Downloaded the 7.4 drivers today, will try putting them on tommorow to see if it makes any difference or not.

Cheers for the advice on the preferences file, I'll give them ago and see if it makes any difference as well.
ijeffers is offline   Reply With Quote
Old 22-04-2007, 11:46 AM   #7
Daveydje
Junior Member
 
Join Date: Mar 2007
Location: United Kingdom
Posts: 11
Default

Quote:
Originally Posted by khazneh
Catalyst Control Panel has a temperature indicator in the Overclocking section - keep an eye on this. I had an X800 Pro and it would crash if the temperature rose above about 75 degrees. Alhough less than 65 is healthy.
HI, thanks for the reply. The X800 GTO Catalyst Control Panel doesn't seem to have an overclocking section... looked through all the advanced tabs, but it doesn't seem to be there. Can you point me in the right direction (in case i'm being thick, and just can't find it) or do you know of any external apps that'll check the card temp?

Running 7.4 drivers at the moment.
Daveydje is offline   Reply With Quote
Old 22-04-2007, 12:08 PM   #8
khazneh
Stormreach Mentor
 
khazneh's Avatar
 
Join Date: Dec 2005
Location: Buckinghamshire, UK
Posts: 7,625
Default

Are you running Catalyst Control Panel in advanced mode? If you are then the Overclock section is the bottom option on the left.
__________________
"If anyone was to ask for my opinion, which I note they're not, I'd say we were taking the long way around." (Gimli)
khazneh is offline   Reply With Quote
Old 22-04-2007, 01:27 PM   #9
Daveydje
Junior Member
 
Join Date: Mar 2007
Location: United Kingdom
Posts: 11
Default

Quote:
Originally Posted by khazneh
Are you running Catalyst Control Panel in advanced mode? If you are then the Overclock section is the bottom option on the left.
Thanks again, still not seeing it though... Screenshot below.
http://img178.imageshack.us/img178/7826/catalystvp0.jpg

However... I did make the UserPreferences.ini changes, and set AllowFakeFullScreen=False and SyncToRefresh=True, and i've just played for over an hour without any VPU Recover, or other graphics glitches... So fingers crossed, that seems to have fixed it!

Thanks again.
Daveydje is offline   Reply With Quote
Old 22-04-2007, 01:53 PM   #10
ijeffers
Member
 
ijeffers's Avatar
 
Join Date: Dec 2006
Location: 1 Twinfall Path, Ladenael, Falathforn, Evernight
Posts: 45
Default

Quote:
Originally Posted by Daveydje
Thanks again, still not seeing it though... Screenshot below.
http://img178.imageshack.us/img178/7826/catalystvp0.jpg

However... I did make the UserPreferences.ini changes, and set AllowFakeFullScreen=False and SyncToRefresh=True, and i've just played for over an hour without any VPU Recover, or other graphics glitches... So fingers crossed, that seems to have fixed it!

Thanks again.
Thats how my CCC looks as well.

Just installed the new drivers now so will see how I come on before I make the preference changes.
ijeffers is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT. The time now is 02:26 PM.


Powered by vBulletin®
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.