Mission: destroy 2 SAM sites (after the landing at the beach)

[BT] Blaster · 27-02-2003, 06:33 PM

Hi,

got a problem (again

) in the mission afther you came on the beach with that weird hovercraft:P.

*I got problems with the laser designator.
In the mission you must lock your laser des. on the SAm Sites round 15m. But i got a lock and waited and waited and there comes the airplane and he was shotted down by the SAm site and now the Sam is still there and a second try with the laser designator doesnt work so how come??

Must it be exacly 15m? or AHHH pls help me:S
______________________
dennis>...

Zzeno · 27-02-2003, 08:20 PM

It has to be done before the plane is shot down. Should work at 15M. It will tell you if theres a lock

[BT] Blaster · 27-02-2003, 08:22 PM

hi
thnx for the information im going 2 try that.

But you say before the plane do you mean i must do tboth SAMS before the plane???

grts Dennis

27-02-2003, 06:33 PM	#1 (permalink)
[BT] Blaster Member Join Date: Feb 2003 Posts: 92	Mission: destroy 2 SAM sites (after the landing at the beach) Hi, got a problem (again ) in the mission afther you came on the beach with that weird hovercraft:P. *I got problems with the laser designator. In the mission you must lock your laser des. on the SAm Sites round 15m. But i got a lock and waited and waited and there comes the airplane and he was shotted down by the SAm site and now the Sam is still there and a second try with the laser designator doesnt work so how come?? Must it be exacly 15m? or AHHH pls help me:S ______________________ dennis>...

27-02-2003, 08:20 PM	#2 (permalink)
Zzeno Producer Join Date: Feb 2003 Location: UK Posts: 7,168	It has to be done before the plane is shot down. Should work at 15M. It will tell you if theres a lock __________________ ------------ Mike "Zzeno" Rowland Producer Codemasters Online Jumpgate Evolution The Lord of the Rings Online Dungeons and Dragons Online RF Online - retired For any technical problems and assistance go to http://cogsupport.codemasters.com/ Billing enquiries Knowledgebase

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

27-02-2003, 08:22 PM	#3 (permalink)
[BT] Blaster Member Join Date: Feb 2003 Posts: 92	hi thnx for the information im going 2 try that. But you say before the plane do you mean i must do tboth SAMS before the plane??? grts Dennis