Cmr2

Harry Brown · 22-12-2004, 04:59 PM

Hi Folks
Sorry in my previous post I meant of course CMR2. I still can't get the launch to work.
Regards
Harry

Adamas · 22-12-2004, 09:58 PM

Hi,
is it an original CD or a copy?
If it's a copy then you have to put the "crack" file in your hard disk

Adamas · 22-12-2004, 10:05 PM

Something else.
What kind of installation did you make? Full? Minimum?
Try to go: Start,programms, codemasters, Colin McRae Rally2, Colin McRae Rally2 (not network!!)

Harry Brown · 24-12-2004, 01:12 PM

Hi Ademas
Yes, it is an original cd that came with my Tiny computer.
I've tried all levels of installation Minmum Medium and Full. When I installed it on Full it would only work with "Network" setting but this is for competing with other users which I am not up to at this stage. I've re-installed it at the other levels without success. I've also tried Start, Programs, Codemasters etc. No joy.
I have to tell you that it has worked well in the past but I now can only get to the Launcher stage, I click on play, the egg timer changes back into the arrow after a few seconds and does not launch.

Thanks a lot for your reply. I'll keep on trying.

Regards
Harry

chacaf22 · 30-12-2004, 05:25 AM

set compatibiliti in win 98/me or win 2000

ripper11 · 08-01-2005, 12:04 PM

Maybe you´ve got a RADEON graphiccard. This doesn´t work as I found out :-(
Change to an other card like GeForce and everything works well

gt 3.0 · 09-01-2005, 05:15 PM

If you have two drives. Such as a dvd drive and a cd- writer. Try uninstalling Cmr 2 and insalling on to the other drive. On my old PC Cmr 2 did not like my dvd drive i had to run it from my cd-writer.

Harry Brown · 09-01-2005, 05:55 PM

Hi ripper11
Thanks for your reply.

I'll check it out
Regards
Harry

Harry Brown · 09-01-2005, 06:02 PM

Hi gt.3
Thanks for your reply.
My dvd and rw drives are are combined. How do I separate them to install Cmr2??

Regards
Harry

gt 3.0 · 09-01-2005, 07:34 PM

Hi Harry, i have two separate drives like a lot of systems , i hoped you had the same .

22-12-2004, 04:59 PM	#1 (permalink)
Harry Brown Junior Member Join Date: Dec 2004 Posts: 9	Cmr2 Hi Folks Sorry in my previous post I meant of course CMR2. I still can't get the launch to work. Regards Harry

09-01-2005, 05:15 PM	#7 (permalink)
gt 3.0 Senior Member Join Date: Dec 2002 Location: Wales. UK Posts: 441	If you have two drives. Such as a dvd drive and a cd- writer. Try uninstalling Cmr 2 and insalling on to the other drive. On my old PC Cmr 2 did not like my dvd drive i had to run it from my cd-writer. __________________ That throwing stick stunt of your's has boomaranged on us !

09-01-2005, 05:55 PM	#8 (permalink)
Harry Brown Junior Member Join Date: Dec 2004 Posts: 9	Cmr2 Hi ripper11 Thanks for your reply. I'll check it out Regards Harry

09-01-2005, 07:34 PM	#10 (permalink)
gt 3.0 Senior Member Join Date: Dec 2002 Location: Wales. UK Posts: 441	Hi Harry, i have two separate drives like a lot of systems , i hoped you had the same . __________________ That throwing stick stunt of your's has boomaranged on us !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

22-12-2004, 09:58 PM	#2 (permalink)
Adamas Junior Member Join Date: Oct 2003 Posts: 11	Hi, is it an original CD or a copy? If it's a copy then you have to put the "crack" file in your hard disk

22-12-2004, 10:05 PM	#3 (permalink)
Adamas Junior Member Join Date: Oct 2003 Posts: 11	Something else. What kind of installation did you make? Full? Minimum? Try to go: Start,programms, codemasters, Colin McRae Rally2, Colin McRae Rally2 (not network!!)

24-12-2004, 01:12 PM	#4 (permalink)
Harry Brown Junior Member Join Date: Dec 2004 Posts: 9	Hi Ademas Yes, it is an original cd that came with my Tiny computer. I've tried all levels of installation Minmum Medium and Full. When I installed it on Full it would only work with "Network" setting but this is for competing with other users which I am not up to at this stage. I've re-installed it at the other levels without success. I've also tried Start, Programs, Codemasters etc. No joy. I have to tell you that it has worked well in the past but I now can only get to the Launcher stage, I click on play, the egg timer changes back into the arrow after a few seconds and does not launch. Thanks a lot for your reply. I'll keep on trying. Regards Harry

30-12-2004, 05:25 AM	#5 (permalink)
chacaf22 Junior Member Join Date: Aug 2004 Posts: 19	set compatibiliti in win 98/me or win 2000

08-01-2005, 12:04 PM	#6 (permalink)
ripper11 Junior Member Join Date: Nov 2004 Posts: 5	Maybe you´ve got a RADEON graphiccard. This doesn´t work as I found out :-( Change to an other card like GeForce and everything works well

09-01-2005, 06:02 PM	#9 (permalink)
Harry Brown Junior Member Join Date: Dec 2004 Posts: 9	Hi gt.3 Thanks for your reply. My dvd and rw drives are are combined. How do I separate them to install Cmr2?? Regards Harry